Projection 3 3/8″. Fastenings No. 128 spanner-nut and threaded stud for attachment back to back, or singly with cap nuts or expansion anchors. Stud on back of base, let into face of wall or partition, prevents turning of hook.
With rubber stop for use with outswinging doors. Used with No. 69 or No. 69A slide bolt for doors 1 1/8″ to 1 3/8″ thick. For extra thick stiles an extension flange is provided, making the clamp adjustable 1 3/8″ to 1 3/4″, when so ordered. Fastenings included are threaded brass studs 1/4-20 in suitable length.
Length: 2 1/2 in
For entrance doors, length overall 7 1/2″, diameter of flanges 1 1/2 “. Grip 3/8″ to 7/8” oval.
Used with outswinging stall doors, length overall 4 3/4″. Fastenings, oval head wood screws.
Same as No. 78 except with thru-bolt fastening. Stud on back of flange prevents turning of hook, so it can only be removed from outside of stall.
With renewable rubber tip; used with inswinging doors, stops door from slamming against partition. Overall length 4 inches, diameter of base 1 7/8″. Fastenings, oval-head wood or machine screws as required.
Flange 2 3/4″ in diameter, projection 3 1/2″. Fastenings No. 128 spanner nuts and threaded studs for attachment back to back or singly with cap nuts or expansion anchors. Federal Specification WW-P-541a Fig. Type 420
Soap holder with wall bracket attached. Overall length 4 1/2″, projection 3 1/8″, with drain holes. Fastenings, No. 128 spanner head nuts and threaded studs for attachment back to back on shower partitions, or singly with cap nuts or expansion anchors.
With friction spring and back plate. Base 2″ x 2 1/2″, bolt 3/4″ x 3/16″. Fastenings, round head wood screws.
With rubber stop for use with inswinging doors; used with No. 69 or No. 69A slide bolt for doors 1 1/8″ to 1 1/4″ thick. Clamp 2 1/2″ in length, flange adjustable for stiles 1 1/8″ to 1 3/8″ thick. for extra thick stiles an extension flange is provided, making the clamp adjustable 1 3/8″ to 1 3/4″, when so ordered. Fastenings included are threaded brass studs 1/4-20 in suitable length.
Length: 2 1/2 in
With friction spring. Base 1 3/4″ x 2 9/16″, bolt 3/4″ x 1/4″. Fastenings, oval head wood screws.
Bolt Size:
3/4 x 1/4 in
Base Size:
1 3/4 x 2 9/16 in
With rubber stop. For use with No. 169 Swing Latch and inswinging door. Flanges adjustable for 1 1/8″ to 1 3/8″ stiles. For extra thick stiles an extension flange is provided, making the clamp adjustable 1 3/8″ to 1 3/4″. Length 2 1/2″.
67-Spring Hinge are made for application hinge stile at right angle to partition; for either right or left hand door, opening in or out. Spring hinges may be used in “pairs” or in “sets” (one spring hinge and one blank hinge to each door.) blank hinges are also used in pairs for pipe-space access doors and similar purposes. Self-opening springs, to hold door open, will be supplied, unless self-closing is specified (self-closing required for outswinging doors). Outside diameter of barrel 7/8″; clamp flange is adjustable for 1 1/8″ to 1 3/4″ thickness stile, minimum thickness of flanges 0.09 inches. Fastenings included are 1/4″ 20 brass threaded rod of suitable length.
All hardware can be supplied with cap nuts (GV126) or spanner nuts (GV128).
Diameter
7/8 in
Stone Thickness
1 1/8 to 1 3/8 in
Option
Cap Nuts (GV126)
Spanner Nuts (GV128)
Swing latch used with GV172 or GV176 or GV169K
Plat Size:
2 x 2 in
Bar Size:
4 x 1 x 1/4 in
With rubber stop. For use with No. 169 Swing Latch and outswinging door. Flanges adjustable for 1 1/8″ to 1 3/8″ stiles. For thick stiles an extension flange is provided, making the clamp adjustable 1 3/8″ to 1 3/4″. Length 2 1/2″.
Length:
2 1/2 in
Adjustable Clamp Size:
1 1/8 to 1 3/8 in
Consists of ball bearing gravity action lower hinge and upper pintle hinge, with fastenings as required. Specify right or left hand. Cylinder 3″ long, 1 1/8″ diameter, bracket requires space 2″ wide on back stile. For inswinging doors only.
Stone Thickness:
1 to 1 3/8 in
Length:
3 in
Width:
2 in
Single acting. Length of flanges 4 inches, box flanges adjustable form 1 1/8″ to 1 3/8″. Self-opening springs, to hold door open supplied standard, unless self-closing is specified.
Stone Thickness:
1 1/8 to 1 3/8 in
Length:
4 in
Surface type, length of flanges 4 inches. Self opening springs, to hold door open supplied standard, unless self-closing is specified.
Length: 4 in
For stile level with top of door. For extra thick styles an extension flange is provided making the clamp adjustable form 1 3/8″ to 1 3/4″, when so ordered; when this is done, specify whether the hinges are on the right or left hand side of the opening when entering the stall.
For attaching to Flat Surface
Specify right or left hands mounting and inswing or outswing.
Mounting:
Left hand mounting
Right hand mounting
Swing:
Inswing
Outswing
Operated by weight of door acting on a cam in contact with a ball bearing roller which is attached to the pintle. Hinges may be adjusted to close door or hold open at any desired angle. Can swing in or out. Clamps adjustable for stone 1 1/8″ to 1 3/8″ thickness. Specify weather hinges for right or left hand mounting and for inswing or out swing doors.
For stile extending above top of door. Operated by weight of door acting on cam in contact with a ball bearing roller which is attached to the pintle. Pintle may be adjusted to close door or hold open at any desired angle. Operated either double-acting or single-acting, swinging in or out, right or left hand. Housing 2″ diameter, stile clamps 2 1/2″ in length. The clamps are adjustable for attachment to stiles 1 1/8″ to 1 3/8″ in thickness.
Specify whether the hinges are on the right or left hand side of the opening when entering the stall.
Diameter
2 in
Stone Thickness
1 1/8 to 1 3/8 in
Length
2 1/2 in
Used with outswinging stall doors, length overall 4 1/4″. Fastenings, oval head wood screws. Flange Size 1 1/2 in